VINTAGE e ANALOGICI ITALIANI: ma come?

Il synth per definizione, la storia della tastiera....

VINTAGE e ANALOGICI ITALIANI: ma come?

Postby Support Synthonia » Thu Nov 20, 2008 3:34 pm

Ultimamente sul nostro forum si stà sempre più parlando di argomenti gustosi tipo il Vintage e gli Analogici.
Penso che sia una grande cosa, visto che siamo un forum giovane sia come concepimento che come età media dei membri.

Comunque quello di cui vorrei parlare qui riguarda la produzione di strumenti musicali made in Italy negli anni passati.

Possiamo fare una lista di aziende e situazioni + o - importanti e vedere cosa ne è rimasto o come si sono evolute queste realtà.

Aziende tipo ELKA, PARI, CRUMAR, ecc ecc

Io a giorni dovrei avere per le mani un BIT01 di Crumar, ho avuto altri prodotti diciamo VINTAGE di ELKA, ma nulla di analogico.

PARI INVECE?
User avatar
Support Synthonia
Site Admin
 
Posts: 7457
Joined: Tue Jan 01, 2008 8:31 pm

Re: VINTAGE e ANALOGICI ITALIANI: ma come?

Postby TSK » Thu Nov 20, 2008 9:27 pm

non c'è mica anche la siel?mi pare di averla sentita da qualche parte...
comunque non ho mai sentito parlare della PARI...cos'ha fatto?
Setup: Alesis Fusion 6HD, Access Virus Rack, Korg TR61
User avatar
TSK
Junior Member
 
Posts: 377
Joined: Sat Nov 15, 2008 1:01 pm
Location: Piacenza

Re: VINTAGE e ANALOGICI ITALIANI: ma come?

Postby Support Synthonia » Fri Nov 21, 2008 1:46 am

TSK wrote:non c'è mica anche la siel?mi pare di averla sentita da qualche parte...
comunque non ho mai sentito parlare della PARI...cos'ha fatto?

La pari ha fatto la storia degli organi italiani, per un periodo era quasi riuscita ad avere un seguito in italia alla "pari" di Hammond, scusate il gioco di parole. :)
User avatar
Support Synthonia
Site Admin
 
Posts: 7457
Joined: Tue Jan 01, 2008 8:31 pm

Re: VINTAGE e ANALOGICI ITALIANI: ma come?

Postby synth64 » Fri Nov 21, 2008 4:47 pm

c è pure la farfisa e se non sbaglio la EKO(jean michel jarre dovrebbe avere la drum machine)
la siel è stata acquistata dalla roland quando è fallita infatti alcuni strumenti sono prodotti qui in italia
(piano & arranger)
synth64
 
Posts: 83
Joined: Mon Aug 18, 2008 11:27 am
Location: milano

Re: VINTAGE e ANALOGICI ITALIANI: ma come?

Postby Support Synthonia » Fri Nov 21, 2008 6:15 pm

synth64 wrote:c è pure la farfisa e se non sbaglio la EKO(jean michel jarre dovrebbe avere la drum machine)
la siel è stata acquistata dalla roland quando è fallita infatti alcuni strumenti sono prodotti qui in italia
(piano & arranger)

Si infatti, quanta roba ragazzi, anche se ora l'azienda musicale italiano è in ripresa, da KETRON a FATAR a queste nuove realtà di KEYBDUO e HAMICHORD.
Speriamo che la crisi economica nn le uccida da capo :thumbdown:
User avatar
Support Synthonia
Site Admin
 
Posts: 7457
Joined: Tue Jan 01, 2008 8:31 pm

Re: VINTAGE e ANALOGICI ITALIANI: ma come?

Postby synth64 » Sat Nov 22, 2008 10:11 am

c è pure la gem e la bontempi
synth64
 
Posts: 83
Joined: Mon Aug 18, 2008 11:27 am
Location: milano

Re: VINTAGE e ANALOGICI ITALIANI: ma come?

Postby mooger » Sat Nov 22, 2008 1:00 pm

synth64 wrote:c è pure la gem e la bontempi

Aggiungo la JEN.
Di cui ne sono possessore,esattamente JEN SX2000

Eccolo qui:


Image

The SX-2000 Synthetone is an analog monophonic synthesizer designed for use with an organ (it was meant to sit on top of the organ). This type of late 1970's synthesizer design (with the knobs, sliders and switches in front of the keyboard) was also seen in the Roland SH-1000, SH-2000, Minitmoog and Elka Soloist. The SX-2000 has 7 presets which include: synthy, harpsichord, flute, clarinet, violin, trumpet and piano. Presets are selected via the red switches towards the left of the keyboard.

Luckily it has plenty of simple to tweak analog synth functions to manipulate those boring old preset sounds. It features a single VCO, switchable over four octaves and equipped with four waveforms (sawtooth, square, and two rectangular). The VCF is a simple low-pass filter with cut-off and resonance (emphasis) and can be modulated by the LFO or one of 3 preset envelope effects. The VCA can also be modulated by these 3 preset envelope effects which include: repeat (which constantly repeats AD envelope), ASR (with sustain), AD (without sustain). The LFO can modulate the oscillator or the filter with either square or triangle waveforms. Finally a Portamento effect is on-board for those elastic synth sounds. Nice wood end-cheeks and unique Italian sound make this rarity worth a look, if you happen to find one.

Caratteristiche Tecniche:

Polyphony - Monophonic
Oscillators - One VCO (sawtooth, square, 2 rectangular waveforms); 4-octave range (32', 16', 8', 4')
LFO - Square or triangle waveforms; intensity and speed; can modulate VCO or VCF
Filter - 1 VCF Filter with cut-off, emphasis; 3 preset envelope settings: Repeat, ASR, and AD.
VCA - 3 preset envelope settings: Repeat, ASR, and AD
Keyboard - 44 keys
Memory - None
Control - None
Date Produced - 1978 - 1982

fonte:

http://www.vintagesynth.com/
Yamaha Motif 6 CLASSIC,MOOG Little Phatty I ,Novation Supernova II Keyboard,Access Virus B Desktop,Access Virus TI Desktop,Roland D50,Korg Wavestation A/D,N.I.KORE ,Yamaha Psr S700,Roland E-15,Mixer Yamaha 01v,Monitor Yamaha Ns-10M,M-AUDIO AUDIOPHILE FW
User avatar
mooger
Platinum Member
 
Posts: 706
Joined: Wed Jan 02, 2008 11:45 pm
Location: Caserta

Re: VINTAGE e ANALOGICI ITALIANI: ma come?

Postby Support Synthonia » Sat Nov 22, 2008 2:05 pm

Mamma mia che roba amici, certo che sapere che tutti questi strumenti sono sparsi in giro per il mondo e cene sono tantissimi in cantine a prendere polvere e umidità mi fà davvero star male.

Io ho avuto una BOMTEMPI a 4 anni, poi è rimasta a casa come un mobile fino ai 9 anni, per poi andare in cantina quando ho preso la mia psr5700.

Comunque prossimamente ci sarà un VIDEO su una ELKA, ho trovato un amico che ne ha una appunto in cantina :thumbup:
User avatar
Support Synthonia
Site Admin
 
Posts: 7457
Joined: Tue Jan 01, 2008 8:31 pm

Re: VINTAGE e ANALOGICI ITALIANI: ma come?

Postby ClaviKorg » Sat Nov 22, 2008 2:23 pm

VISCOUNT non è italiana?
Obhereim MC2000 <> Novation Xstation 61 <> DSI EVOLVER <> Korg Triton Rack + EXB-PCM-01 <> Voce V5 <> Gem RP-X <> Akai Synthstation 25 <> mixer Mackie vlz <> FBT MaxX 2A speaker
User avatar
ClaviKorg
Platinum Member
 
Posts: 899
Joined: Sat Jan 26, 2008 7:39 pm
Location: Taranto - Torino

Re: VINTAGE e ANALOGICI ITALIANI: ma come?

Postby synth64 » Mon Nov 24, 2008 5:24 pm

bellissima la jen sx 2000 non l avevo mai vista

c è pure la orla , avevo un organo anni fa....
synth64
 
Posts: 83
Joined: Mon Aug 18, 2008 11:27 am
Location: milano

Next

Return to Analogici / Vintage

Who is online

Users browsing this forum: No registered users and 6 guests