Log in Register

Login to your account

Username *
Password *

VAST Tutorial - Programming examples: "The Final Countdown"


Written on Sunday, 11 January 2015 22:11
Written by  GioJ93

VAST Tutorial - Programming examples: "The Final Countdown"

"Ascending" Super Saw
(1). Select the Default Program 999 and press EDIT button.
(2). Open ALG page and select algorithm 5.
(3). Open the AMPENV page and switch to USER, otherwise you would use the piano's envelope.
(4). Open DSPMOD page and assign a negative value to Saw Pch and then assign the same value in cents, but positive, as Src1 Depth. Select ENV2 as Src1. For example: Saw Pch: -7ST / Src1: ENV2 / Depth: +700ct.
(5). In the ENV2 page, assign to Att1 the value you need.

http://www.youtube.com/watch?feature=player_embedded&v=Kh4EKK6yd_c

Noise + filters
(1). Select Default Program 999 and press EDIT button.
(2). Open the KEYMAP page and select Noise as PlayBackMode, so White Noise will be reproduced.
(3). Switch the parameter in AMPENV page form NORMAL to USER.
(4). Select the algorithm 6 in ALG page; select 2POLE HIPASS in the first block and 2POLE LOWPASS in the second.
(5). Open DSPMOD page and choose the right frequencies for the hipass; select the lowpass and assign the maximum value to LP Freq, then go to the right side and set Src1: ENV2 / Depth: 10800ct
(6). Open the ENV2 page and set Att1 and Dec1 to -100%, then adjust the Att1 time and add some LP resonance to make the filter self oscillate


Rate this item
(3 votes)
Read 5118 times
Published in Tutorials
Last modified on Sunday, 11 January 2015 22:14